Buyer's Guide
Wash Basin with Full Pedestal | What Wholesalers Should Check
Sizes, tap-hole options, wall fixing and export packing for full pedestal wash basins, explained for importers and distributors ordering by the container.
A full pedestal basin looks like the simplest product in a bathroom range, so buyers often choose a wash basin with full pedestal manufacturer on a photograph and a unit price.
The problems arrive with the container: a basin that rocks on its pedestal, tap holes that don't suit the taps customers actually fit, or a chipped rim because the column was packed hard against it. All of this can be prevented with a handful of questions asked before the order is confirmed.
This guide covers sizes, tap holes, fixing, and how the basin and pedestal travel together.
Sizes and Proportions
Basin Width and Depth
Full pedestal basins are commonly made in widths from roughly 450 mm to 600 mm, though ranges differ between factories, so work from each supplier's current list. Width matters less than the combination of width and projection (how far the basin sticks out from the wall). A compact cloakroom basin and a family bathroom basin can have similar widths and very different depths, and the shallower one is the one that gets complaints about splashing.
Why the Pedestal Height Matters
The pedestal is made to bring the basin rim to a comfortable working height, and that height is not identical across all models. Two basins with the same width can sit several centimetres apart once fitted. Collect the overall installed height for every model you plan to stock, and keep it on your own spec sheet so a dealer can answer a customer without calling you.
Tap-Hole Options
The Common Configurations
A basin is drilled to suit a particular type of tap, and a hole that is not there cannot be added on site. The usual choices are:
- No tap hole, for wall-mounted taps fitted above the basin.
- One tap hole, for a single-lever mixer.
- Two tap holes, for separate hot and cold pillar taps.
Some ranges add a third position for specific tap designs. Look at what your customers actually install. If most of your market fits mixers, a two-hole basin is slow stock; if pillar taps are the norm, the reverse is true.
Overflow and Waste Compatibility
Check whether the basin has a slotted overflow, and then check which waste fitting goes with it. A slotted waste suits a basin with an overflow; using the wrong type leaves the overflow unconnected or causes leaks. Confirm too whether the waste, taps and fixings are included in the price or sold separately. Mix-ups here produce a surprising share of after-sales calls.
Fixing and Mounting
What Carries the Weight
It is easy to assume the pedestal supports the basin. In most designs the basin is fixed to the wall, and the pedestal gives added support and hides the supply pipes and trap. Whether the pedestal is also fixed to the floor depends on the model. Ask for the manufacturer's fitting instructions for each model, because the specifics decide how a plumber should install it, and your dealers will be asked.
Wall Type and Fixing Hardware
A basin held on bracket screws needs a wall that can take them. Solid masonry is straightforward; stud or board walls typically need reinforcement behind the fixing points.
If your market includes a lot of lightweight partition construction, say so in your enquiry and ask what hardware comes in the box. Cheap screws and plugs that do not suit the wall are a common reason a good basin gets a bad review.
How the Pair Is Packed for Export
Keeping the Set Together
A basin and its pedestal are separate pieces, so there are two ways they can go wrong. They can be packed apart and end up in different cartons, or different production runs, and they might not match when reunited.
White ceramic varies slightly between firings, and a visible tone difference between bowl and column is hard to ignore on a finished installation. Confirm whether sets are packed in one carton or two, and how each carton is labelled with the same model code so the pairing survives your warehouse.
Protecting the Column
The pedestal is a tall, hollow shape that cracks at the neck and base if cartons are stacked or knocked. The basin's rim and the tap platform are the other weak points. Look for fitted inserts or dividers, corner protection, and cartons strong enough to hold their shape under stacking.
Ask for a photograph of a packed set before shipment, and get the breakage terms written down before the order, not after the damage report.
What to Compare Between Suppliers
Wholesalers and Exporters
You'll find both direct factories and traders in this category. A wash basin with full pedestal wholesaler can often bring together several designs in one order, which suits a first container where you're still learning what sells. Wash basin with full pedestal exporters may also handle documentation and loading for you. Whichever you deal with, the questions are the same: where the pieces are produced, whether basin and pedestal come from the same batch, and who answers for damaged units.
Range Overlap Within Your Order
Think about what else the container could carry. Buyers building a bathroom range often add other items from the same plant, which can improve how the container is filled. Our wash basin pedestal range is a good starting point.
If your customers prefer a basin where the pedestal is not a separate piece, see the one-piece basin range, and the wider sanitary ware collection for items that can ship alongside.
Samples Before Volume
What to Check on Arrival
Order a complete set before you discuss quantity. Assemble it, then check that the pedestal sits flush against the basin, that the tap holes line up with your usual taps, that the overflow runs clear, and that the colour matches between pieces. Place it against a wall at the correct fitting height and see how it looks and feels in use.
Keeping a Reference Set
Store the sample, labelled with the supplier and date. When the first shipment arrives, compare a few pieces against it. That single reference settles most arguments about whether the goods match what was agreed.
Planning a Basin Order
Tell us the basin sizes you want, the tap-hole configuration, whether waste and fixings should be included, and your approximate quantity. We can respond with specifications, sample options and packing details. Contact Eternal Overseas to get started.
Talk to our export desk More guides
Frequently asked questions
What Is the Difference Between a Full and a Semi Pedestal Basin?
A full pedestal reaches from the basin down to the floor and hides the pipework. A semi pedestal stops short of the floor, leaving the lower section visible and the floor clear.
Does the Pedestal Support the Basin's Weight?
Usually the basin is fixed to the wall, with the pedestal adding support and concealing pipes. Check the manufacturer's instructions for the specific model, since fixing methods differ.
How Can I Reduce Breakage When Shipping Basins and Pedestals?
Confirm that each set is packed with inserts or dividers, that cartons are labelled with the same model code, and that the pallet and container load is braced. Agree the breakage terms in writing before you confirm the order.